Support Us!
KeyWallet Team tries its best to bring out a new version. Currently we did not decide if this new version should be a donationware or shareware. Please donate even $1 to help us in our decision. We are also eager to keep KeyWallet a free independent product.

Contact
You can also contact us by e-mail. But please use our community forums to communicate with us. We get a lot of mails with the same question.

Regarding the Windows XP compatibility please read the following forum posting

Who's Online
There are currently, 14 guest(s) and 1 member(s) that are online.

You are Anonymous user. You can register for free by clicking here.

Moderated By: cool
KeyWallet - Free Password Manager Forum Index Custom Region Skins A related component type is the power (film) capacitor
  
KeyWallet - Free Password Manager Forum Index
Author A related component type is the power (film) capacitor
Sebahtstian

Joined: Jun 24, 2017
Posts: 71
From:
  Posted: 2017-09-10 22:14

The dielectric films, depending on the desired dielectric strength, are drawn in a special process to an extremely thin thickness, and are then provided with electrodes. The electrodes of film capacitors may be metallized aluminum or zinc applied directly to the surface of the plastic film, or a separate metallic foil. Two of these conductive layers are wound into a cylinder shaped winding, usually flattened to reduce mounting space requirements on a printed circuit board, or layered as multiple single layers stacked together, to form a capacitor body. Film capacitors, together with ceramic capacitors and electrolytic capacitors, are the most common capacitor types for use in electronic equipment, and are used in many AC and DC microelectronics and electronics circuits.[1]

A related component type is the power (film) capacitor. Although the materials and construction techniques used for large power film capacitors are very similar to those used for ordinary film capacitors, capacitors with high to very high power ratings for applications in power systems and electrical installations are often classified separately, for historical reasons. As modern electronic equipment gained the capacity to handle power levels that were previously the exclusive domain of "electrical power" components, the distinction between the "electronic" and "electrical" power ratings has become less distinct. In the past, the boundary between these two families was approximately at a reactive power of 200 volt-amperes, but modern power electronics can handle increasing amounts of power.

motor run capacitor manufacturers motor run capacitor manufacturers
electrolytic capacitors manufacturers China electrolytic capacitors manufacturers China
power electrolytic capacitors power electrolytic capacitors
polyester film manufacturers in China polyester film manufacturers in China



 Profile  Quote
  
Jump To:
Copyright 1997-2004 KeyWallet GbR. All rights reserved.